Page Comparison

Step-by-step guide

...

Image Added

1. Swipe down from the top to see your WiFi icon.
   
    Image Added
2. Select and hold the WiFi icon.
    Image RemovedImage Added
3. Select the UALR-WiFi connection.
   Image Removed
     If WiFi is off, turn it on, then select UALR-WiFi.  You may need to accept a certificate to proceed.  Accept the certificate if it is presented.
   Image Added
   
   
4. Enter the following information: 

   EAP method: PEAP

   Phase 2 Authentication: None

   CA certificate: Select "Use Certificate" (Unspecified)

   Domain Name ualr.edu

   Identity: Your NetID

   Password: Your Password

   Then select CONNECT
   

   Image RemovedImage Added
5. You should now be connected to the UALR-WiFi network
   
6. NOTE:If you change your NetID password and can no longer access the wireless network using the UALR-WiFi network, do the following:
   

   1. Go to Network Settings and Remove the UALR-WiFi network by pressing and holding the UALR-WiFi network ion.  A menu will appear.  Select Forget Network. 

   2. Setup the UALR-WiFi connection again using the instructions in this document.

Related articles

...