Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.

If the typical Google Android instructions did not work for your computer, try these alternative instructions to for the UALR-WiFi network.

Step-by-step guide



  1. Swipe down from the home screen and select the settings icon located in the upper-right corner of the screen.  The icon looks like a flowergear.
     Image RemovedImage Added

  2. Select "Connections," then WiFi
    Image Removed If WiFi is off, turn it on, then select UALR-WiFi.  You may need to accept a certificate to proceed.  Accept the certificate if it is presented.
    Image Removed"WiFi." Make sure WiFi is turned on.
    Image Added 

    Image Added

  3. Enter the following information: 
    Identity: Your full UALR Email
    Password: Your UALR Email Password
    CA certificate: Use system certificates
    EAP method: PEAP

    Phase 2 Authentication: None

    CA certificate: (Unspecified)

    Identity: Your UALR Email

    Password: Your Password

    Then select CONNECT
    Image Removed 

    You should now Minimum TLS version: TLS v1.0
    Online certificate status: Don't validate
    Phase 2 authentication: MSCHAPV2
    Image Added

    Image Added

  4. Scroll down and tap "Connect." You should be connected to the UALR -WiFi networkWiFi. Note that anytime your UALR password is reset, you may have to follow this process again.

Filter by label (Content by label)
cqllabel = "kb-how-to-article" and label = "wireless-network" and type = "page" and space = "TECHSUPPORT"