Step-by-step guide

Add the steps involved:

1. .Select the Network icon located in the lower-right corner of the screen.
   
    
2. Select a network by selecting the arrow located to the right of the network icon.
    
3. Select the UALR-WiFi connection.
   
    
4. If WiFi is off, turn it on, then select UALR-WiFi.  You may need to accept a certificate to proceed.  Accept the certificate if it is presented.
   
   
5. Enter the following information: 

   EAP method: PEAP

   Phase 2 Authentication: None

   CA certificate: (Unspecified)

   Identity: Your NetID 2.0 (your full email address)
   

   Password: Your Password

   Then select CONNECT
   

   
6. You should now be connected to the UALR-WiFi network
   
7. Note: If you change your NetID password and can no longer access the wireless network using the UALR-WiFi network, do the following:

   1. Go to Network Settings and Remove the UALR-WiFi network by pressing and holding the UALR-WiFi network ion.  A menu will appear.  Select Forget Network. 

   2. Setup the UALR-WiFi connection again using the instructions in this document.

Related articles

Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.