Page Comparison

Step-by-step guide

1. .Select the Network icon located in the lower-right corner of the screen.
   Image Removed
    Swipe down from the top to see your wifi icon.
   
    Image Added
2. Select a network by selecting the arrow located to the right of the network icon.
    Image Removed
3. Select the UALR-WiFi connection.
   
    
4. If WiFi is off, turn it on, then select UALR-WiFi.  You may need to accept a certificate to proceed.  Accept the certificate if it is presented.
   
   
5. Enter the following information: 

   EAP method: PEAP

   Phase 2 Authentication: None

   CA certificate: (Unspecified)

   Identity: Your NetID

   Password: Your Password

   Then select CONNECT
   

   
6. You should now be connected to the UALR-WiFi network
   

...