Step-by-step guide
- Swipe down from the top to see your wifi icon.
- Select a network by selecting the arrow located to the right of the network icon.
- Select the UALR-WiFi connection.
- If WiFi is off, turn it on, then select UALR-WiFi. You may need to accept a certificate to proceed. Accept the certificate if it is presented.
- Enter the following information:
EAP method: PEAP
Phase 2 Authentication: None
CA certificate: (Unspecified)
Identity: Your NetID
Password: Your Password
Then select CONNECT
- You should now be connected to the UALR-WiFi network
Related articles