Skip to end of metadata
  • Created by Former user, last modified by Former user on Feb 07, 2017
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

Follow these instructions to configure Apple macOS to join the UALR-WiFi network.

Step-by-step guide

  1. Select the wireless network icon in the top right-hand corner to display all available networks.
    Menu options include the status of your Wi-Fi connection and a list of available networks.

  2. Select UALR-WiFi from the list of network options

  3. Enter your NetID and Password then select Join
     
  4. You are now connected to the UALR WiFi network
     
    NOTE:If you change your NetID password and can no longer access the wireless network using the UALR-WiFi network, you will need to Remove the UALR-WiFi network.  To do so, do the following:

    1. Go to Network Settings and  by pressing and holding the UALR-WiFi network ion.  A menu will appear.  Select Forget Network. 

    2. Setup the UALR-WiFi connection again using the instructions in this document.

  5. Select the network icon and select "turn WiFi off
  6. Select Open Network Preferences...
  7. Select Advanced...
  8. Select UALR-WiFi then select the "minus" button.  This will remove the UALR-WiFi Network.  Next select OK
  9. next step
  10. next step
  11. next step

 

 

  • No labels