Configure Microsoft Windows 7 to join UALR-WiFi (alternative instructions)

Owned by Former user (Deleted)
Last updated: Dec 12, 2016 by adm_djs1

If the typical Windows 7 instructions did not work for your computer, try these alternative instructions to for the UALR-WiFi network.

Step-by-step guide

  1. Click the network icon located in the system tray, lower right-hand corner of the screen to display all available networks
     

  2. Click Manage  Wireless Networks located on the left-hand side of the screen
     

  3. Select ADD in the upper left-hand corner then click “Manually create a network profile” located in the Manually connect to a wireless network dialog box
     

  4. In the Manually connect to a wireless network dialog box, enter “UALR-WiFi” for the Network name, then select “WPA2-Enterprise” from the Security type drop-down list
     

  5. You have successfully added the UALR-WiFi network. Next click Change connection settings in the Manually connect to a wireless network dialog box
     

  6. Click the Security tab then click Settings
     

  7. Click Configure in the Protected EAP Properties dialog box
     

  8. Remove the check in the EAP Properties box then click OK to back out of each settings window
     

  9. Click Connect to accept the certificate
     

  10. Enter your NetID and Password then click OK
     

  11. You are now connected to the network