/
Windows 11 802.1x Endpoint Configuration

Windows 11 802.1x Endpoint Configuration

  1. Open Settings and select “Network and Internet

  1. Select “Ethernet

  1. Click the arrow on the right and then click the “Edit” button for “Authentication Settings

  1. Under “Enable IEEE 802.1X authentication, move the toggle to the “On” position and select “Edit Configuration

  1. Under the EAP method, select “Protected EAP (PEAP)”. Under Authentication method, select “Secured password (EAP-MSCHAP v2). Leave all other fields default. Then click “Save”

  1. Navigate back on the Ethernet screen and click “Sign in”

  1. Enter your UA Little Rock username and password

  1. Accept the certificate by selecting “Connect”

  1. Confirm you are connected

 

Related content

Configure Microsoft Windows 10 for 802.1x
Configure Microsoft Windows 10 for 802.1x
More like this
Configure Microsoft Windows 7 for 802.1x
Configure Microsoft Windows 7 for 802.1x
More like this
macOS 802.1x Endpoint Configuration
macOS 802.1x Endpoint Configuration
More like this
Configure Microsoft Windows 11 to join UALR-WiFi
Configure Microsoft Windows 11 to join UALR-WiFi
More like this
Configure Microsoft Windows 7 to join UALR-WiFi (alternative instructions)
Configure Microsoft Windows 7 to join UALR-WiFi (alternative instructions)
More like this
Configure Microsoft Windows 10 to join UALR-WiFi (alternative instructions)
Configure Microsoft Windows 10 to join UALR-WiFi (alternative instructions)
More like this